4 FreeBSD VPN Policy Configuration

At this point, the VPN policy on FreeBSD GW must be defined. The setkey(8) tool performs this function.

Below is an example shell script which will flush setkey(8) and add your VPN policy rules.

#
# /etc/vpn1-ipsec.sh
#
# IP addresses
#
#     External Interface                    External Interface
#       208.229.100.6                       216.218.197.2
#                   |                       |
#        +--> Firewall-1 <--> Internet <--> FreeBSD GW <--+
#        |                                                |
# FW-1 Protected Nets                              Internal Nets
#    199.208.192.0/24                                  192.168.10.0/24
#
# Flush the policy
#
setkey -FP
setkey -F
#
# Configure the Policy
#
setkey -c << END
spdadd 216.218.197.2/32 199.208.192.0/24 any -P out ipsec
esp/tunnel/216.218.197.2-208.229.100.6/require;
spdadd 199.208.192.0/24 216.218.197.2/32 any -P in ipsec
esp/tunnel/208.229.100.6-216.218.197.2/require;
END
#

Execute the setkey(8) commands:

# sh /etc/vpn1-ipsec.sh

This, and other documents, can be downloaded from ftp://ftp.FreeBSD.org/pub/FreeBSD/doc/.

For questions about FreeBSD, read the documentation before contacting <questions@FreeBSD.org>.
For questions about this documentation, e-mail <doc@FreeBSD.org>.