A MAC label is a security attribute which may be applied to subjects and objects throughout the system.
When setting a label, the user must be able to comprehend what it is, exactly, that is being done. The attributes available on an object depend on the policy module loaded, and that policy modules interpret their attributes in different ways. If improperly configured due to lack of comprehension, or the inability to understand the implications, the result will be the unexpected and perhaps, undesired, behavior of the system.
The security label on an object is used as a part of a security access control decision by a policy. With some policies, the label by itself contains all information necessary to make a decision; in other models, the labels may be processed as part of a larger rule set, etc.
For instance, setting the label of biba/low on a file will represent a label maintained by the Biba security policy module, with a value of «low».
A few policy modules which support the labeling feature in FreeBSD offer three specific predefined labels. These are the low, high, and equal labels. Although they enforce access control in a different manner with each policy module, you can be sure that the low label will be the lowest setting, the equal label will set the subject or object to be disabled or unaffected, and the high label will enforce the highest setting available in the Biba and MLS policy modules.
Within single label file system environments, only one label may be used on objects.
This will enforce one set of access permissions across the entire system and in many
environments may be all that is required. There are a few cases where multiple labels may
be set on objects or subjects in the file system. For those cases, the multilabel option may be passed to tunefs(8).
In the case of Biba and MLS, a numeric label may be set to indicate the precise level of hierarchical control. This numeric level is used to partition or sort information into different groups of say, classification only permitting access to that group or a higher group level.
In most cases the administrator will only be setting up a single label to use throughout the file system.
Hey wait, this is similar to DAC! I thought MAC gave control strictly to the administrator. That statement still holds true, to some extent as root is the one in control and who configures the policies so that users are placed in the appropriate categories/access levels. Alas, many policy modules can restrict the root user as well. Basic control over objects will then be released to the group, but root may revoke or modify the settings at any time. This is the hierarchal/clearance model covered by policies such as Biba and MLS.
Virtually all aspects of label policy module configuration will be performed using the base system utilities. These commands provide a simple interface for object or subject configuration or the manipulation and verification of the configuration.
All configuration may be done by use of the setfmac(8) and setpmac(8) utilities. The setfmac command is used to set MAC labels on system objects while the setpmac command is used to set the labels on system subjects. Observe:
# setfmac biba/high test
If no errors occurred with the command above, a prompt will be returned. The only time these commands are not quiescent is when an error occurred; similarly to the chmod(1) and chown(8) commands. In some cases this error may be a “Permission denied” and is usually obtained when the label is being set or modified on an object which is restricted.[1] The system administrator may use the following commands to overcome this:
# setfmac biba/high test “Permission denied” # setpmac biba/low setfmac biba/high test # getfmac test test: biba/high
As we see above, setpmac can be used to override the policy
module's settings by assigning a different label to the invoked process. The getpmac utility is usually used with currently running processes,
such as sendmail: although it takes a process ID in place of a
command the logic is extremely similar. If users attempt to manipulate a file not in
their access, subject to the rules of the loaded policy modules, the “Operation not permitted” error will be displayed by the
mac_set_link function.
For the mac_biba(4), mac_mls(4) and mac_lomac(4) policy modules, the ability to assign simple labels is provided. These take the form of high, equal and low, what follows is a brief description of what these labels provide:
The low label is considered the lowest label setting an object or subject may have. Setting this on objects or subjects will block their access to objects or subjects marked high.
The equal label should only be placed on objects considered to be exempt from the policy.
The high label grants an object or subject the highest possible setting.
With respect to each policy module, each of those settings will instate a different information flow directive. Reading the proper manual pages will further explain the traits of these generic label configurations.
Numeric grade labels are used for comparison:compartment+compartment; thus the following:
biba/10:2+3+6(5:2+3-20:2+3+4+5+6)
May be interpreted as:
«Biba Policy Label»/«Grade 10» :«Compartments 2, 3 and 6»: («grade 5 ...»)
In this example, the first grade would be considered the «effective grade» with «effective compartments», the second grade is the low grade and the last one is the high grade. In most configurations these settings will not be used; indeed, they offered for more advanced configurations.
When applied to system objects, they will only have a current grade/compartments as opposed to system subjects as they reflect the range of available rights in the system, and network interfaces, where they are used for access control.
The grade and compartments in a subject and object pair are used to construct a relationship referred to as «dominance», in which a subject dominates an object, the object dominates the subject, neither dominates the other, or both dominate each other. The «both dominate» case occurs when the two labels are equal. Due to the information flow nature of Biba, you have rights to a set of compartments, «need to know», that might correspond to projects, but objects also have a set of compartments. Users may have to subset their rights using su or setpmac in order to access objects in a compartment from which they are not restricted.
Users themselves are required to have labels so that their files and processes may properly interact with the security policy defined on the system. This is configured through the login.conf file by use of login classes. Every policy module that uses labels will implement the user class setting.
An example entry containing every policy module setting is displayed below:
default:\
:copyright=/etc/COPYRIGHT:\
:welcome=/etc/motd:\
:setenv=MAIL=/var/mail/$,BLOCKSIZE=K:\
:path=~/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:\
:manpath=/usr/share/man /usr/local/man:\
:nologin=/usr/sbin/nologin:\
:cputime=1h30m:\
:datasize=8M:\
:vmemoryuse=100M:\
:stacksize=2M:\
:memorylocked=4M:\
:memoryuse=8M:\
:filesize=8M:\
:coredumpsize=8M:\
:openfiles=24:\
:maxproc=32:\
:priority=0:\
:requirehome:\
:passwordtime=91d:\
:umask=022:\
:ignoretime@:\
:label=partition/13,mls/5,biba/10(5-15),lomac/10[2]:
The label option is used to set the user class default label which will be enforced by MAC. Users will never be permitted to modify this value, thus it can be considered not optional in the user case. In a real configuration, however, the administrator will never wish to enable every policy module. It is recommended that the rest of this chapter be reviewed before any of this configuration is implemented.
Σημείωση: Users may change their label after the initial login; however, this change is subject constraints of the policy. The example above tells the Biba policy that a process's minimum integrity is 5, its maximum is 15, but the default effective label is 10. The process will run at 10 until it chooses to change label, perhaps due to the user using the setpmac command, which will be constrained by Biba to the range set at login.
In all cases, after a change to login.conf, the login class capability database must be rebuilt using cap_mkdb and this will be reflected throughout every forthcoming example or discussion.
It is useful to note that many sites may have a particularly large number of users requiring several different user classes. In depth planning is required as this may get extremely difficult to manage.
Future versions of FreeBSD will include a new way to deal with mapping users to labels; however, this will not be available until some time after FreeBSD 5.3.
Labels may also be set on network interfaces to help control the flow of data across the network. In all cases they function in the same way the policies function with respect to objects. Users at high settings in biba, for example, will not be permitted to access network interfaces with a label of low.
The maclabel may be passed to ifconfig when setting the MAC label on network interfaces. For example:
# ifconfig bge0 maclabel biba/equal
will set the MAC label of biba/equal on the bge(4) interface. When using a setting similar to biba/high(low-high) the entire label should be quoted; otherwise an error will be returned.
Each policy module which supports labeling has a tunable which may be used to disable
the MAC label on network interfaces. Setting
the label to equal will have a similar effect. Review the
output from sysctl, the policy manual pages, or even the
information found later in this chapter for those tunables.
By default the system will use the singlelabel option. But
what does this mean to the administrator? There are several differences which, in their
own right, offer pros and cons to the flexibility in the systems security model.
The singlelabel only permits for one label, for instance
biba/high to be used for each subject or object. It provides for
lower administration overhead but decreases the flexibility of policies which support
labeling. Many administrators may want to use the multilabel
option in their security policy.
The multilabel option will permit each subject or object
to have its own independent MAC label in
place of the standard singlelabel option which will allow
only one label throughout the partition. The multilabel and
single label options are only required for the policies which
implement the labeling feature, including the Biba, Lomac, MLS and SEBSD
policies.
In many cases, the multilabel may not need to be set at
all. Consider the following situation and security model:
FreeBSD web-server using the MAC framework and a mix of the various policies.
This machine only requires one label, biba/high, for
everything in the system. Here the file system would not require the multilabel option as a single label will always be in effect.
But, this machine will be a web server and should have the web server run at biba/low to prevent write up capabilities. The Biba policy and how it works will be discussed later, so if the previous comment was difficult to interpret just continue reading and return. The server could use a separate partition set at biba/low for most if not all of its runtime state. Much is lacking from this example, for instance the restrictions on data, configuration and user settings; however, this is just a quick example to prove the aforementioned point.
If any of the non-labeling policies are to be used, then the multilabel option would never be required. These include the seeotheruids, portacl and partition policies.
It should also be noted that using multilabel with a
partition and establishing a security model based on multilabel functionality could open the doors for higher
administrative overhead as everything in the file system would have a label. This
includes directories, files, and even device nodes.
The following command will set multilabel on the file
systems to have multiple labels. This may only be done in single user mode:
# tunefs -l enable /
This is not a requirement for the swap file system.
Σημείωση: Some users have experienced problems with setting the
multilabelflag on the root partition. If this is the case, please review the Τμήμα 16.16 of this chapter.
| [1] |
Other conditions may produce different failures. For instance, the file may not be owned by the user attempting to relabel the object, the object may not exist or may be read only. A mandatory policy will not allow the process to relabel the file, maybe because of a property of the file, a property of the process, or a property of the proposed new label value. For example: a user running at low integrity tries to change the label of a high integrity file. Or perhaps a user running at low integrity tries to change the label of a low integrity file to a high integrity label. |
Αυτό το κείμενο, και άλλα κείμενα, μπορεί να βρεθεί στο ftp://ftp.FreeBSD.org/pub/FreeBSD/doc/.
Για ερωτήσεις σχετικά με το FreeBSD, διαβάστε την τεκμηρίωση πριν να επικοινωνήσετε με την
<questions@FreeBSD.org>.
Για ερωτήσεις σχετικά με αυτή την τεκμηρίωση, στείλτε e-mail στην <doc@FreeBSD.org>.