2.1 Setting Up the Server for Connections

# cd /usr/ports/net/openldap24-server
# make install clean

security ssf=128

TLSCertificateFile /path/to/your/cert.crt
TLSCertificateKeyFile /path/to/your/cert.key
TLSCACertificateFile /path/to/your/cacert.crt

% openssl genrsa -out cert.key 1024
Generating RSA private key, 1024 bit long modulus
....................++++++
...++++++
e is 65537 (0x10001)
% openssl req -new -key cert.key -out cert.csr

% openssl x509 -req -in cert.csr -days 365 -signkey cert.key -out cert.crt
Signature ok
subject=/C=AU/ST=Some-State/O=Internet Widgits Pty Ltd
Getting Private key

slapd_enable="YES"

% sockstat -4 -p 389
ldap     slapd      3261  7  tcp4   *:389                 *:*

base dc=example,dc=org
uri ldap://server.example.org/
ssl start_tls
tls_cacert /path/to/your/cacert.crt

2.2 Entries in the Database

Authentication against an LDAP directory is generally accomplished by attempting to bind to the directory as the connectin user. This is done by establishing a “simple” bind on the directory with the user name supplied. If there is an entry with the uid equal to the user name and that entry's userPassword attribute matches the password supplied, then the bind is successful.

The first thing we have to do is figure out is where in the directory our users will live.

The base entry for our database is dc=example,dc=org. The default location for users that most clients seem to expect is something like ou=people,base, so that is what will be used here. However keep in mind that this is configurable.

So the ldif entry for the people organizational unit will look like:

dn: ou=people,dc=example,dc=org
objectClass: top
objectClass: organizationalUnit
ou: people

All users will be created as subentries of this organizational unit.

Some thought might be given to the object class your users will belong to. Most tools by default will use people, which is fine if you simply want to provide entries against which to authenticate. However, if you are going to store user information in the LDAP database as well, you will probably want to use inetOrgPerson, which has many useful attributes. In either case, the relevant schemas need to be loaded in slapd.conf.

For this example we will use the person object class. If you are using inetOrgPerson, the steps are basically identical, except that the sn attribute is required.

To add a user testuser, the ldif would be:

dn: uid=tuser,ou=people,dc=example,dc=org
objectClass: person
objectClass: posixAccount
objectClass: shadowAccount
objectClass: top
uidNumber: 10000
gidNumber: 10000
homeDirectory: /home/tuser
loginShell: /bin/csh
uid: tuser
cn: tuser

I start my LDAP users' UIDs at 10000 to avoid colisions with system accounts; you can configure whatever number you wish here, as long as it's less than 65536.

We also need group entries. They are as configurable as user entries, but we will use the defaults below:

dn: ou=groups,dc=example,dc=org
objectClass: top
objectClass: organizationalUnit
ou: groups

dn: cn=tuser,ou=groups,dc=example,dc=org
objectClass: posixGroup
objectClass: top
gidNumber: 10000
cn: tuser

To enter these into your database, you can use slapadd or ldapadd on a file containing these entries. Alternatively, you can use sysutils/ldapvi.

The ldapsearch utility on the client machine should now return these entries. If it does, your database is properly configured to be used as an LDAP authentication server.

3.1 Authentication

security/pam_ldap is configured via /usr/local/etc/ldap.conf.

Thus, we will want to copy all of our original configuration parameters from openldap/ldap.conf to the new ldap.conf. Once this is done, we want to tell security/pam_ldap what to look for on the directory server.

We are identifying our users with the uid attribute. To configure this (though it is the default), set the pam_login_attribute directive in ldap.conf:

pam_login_attribute uid

With this set, security/pam_ldap will search the entire LDAP directory under base for the value uid=username. If it finds one and only one entry, it will attempt to bind as that user with the password it was given. If it binds correctly, then it will allow access. Otherwise it will fail.

auth  sufficient  /usr/local/lib/pam_ldap.so  no_warn

pam_groupdn cn=servername,ou=accessgroups,dc=example,dc=org

memberUid: uid=someuser,ou=people,dc=example,dc=org

auth            required        pam_nologin.so          no_warn
auth            sufficient      pam_opie.so             no_warn no_fake_prompts
auth            requisite       pam_opieaccess.so       no_warn allow_local
auth            sufficient      /usr/local/lib/pam_ldap.so      no_warn
auth            required        pam_unix.so             no_warn try_first_pass

account         required        pam_login_access.so
account         required        /usr/local/lib/pam_ldap.so      no_warn ignore_authinfo_unavail ignore_unknown_user

3.2 Name Service Switch

NSS is the service that maps attributes to names. So, for example, if a file is owned by user 1001, an application will query NSS for the name of 1001, and it might get bob or ted or whatever the user's name is.

Now that our user information is kept in LDAP, we need to tell NSS to look there when queried.

The net/nss_ldap port does this. It uses the same configuration file as security/pam_ldap, and should not need any extra parameters once it is installed. Instead, what is left is simply to edit /etc/nsswitch.conf to take advantage of the directory. Simply replace the following lines:

group: compat
passwd: compat

with

group: files ldap
passwd: files ldap

This will allow you to map usernames to UIDs and UIDs to usernames.

Congratulations! You should now have working LDAP authentication.

3.3 Caveats

Unfortunately, as of the time this was written FreeBSD did not support changing user passwords with passwd(1). Because of this, most administrators are left to implement a solution themselves. I provide some examples here. Note that if you write your own password change script, there are some security issues you should be made aware of; see Section 4.3

#!/bin/sh

stty -echo
read -p "Old Password: " oldp; echo
read -p "New Password: " np1; echo
read -p "Retype New Password: " np2; echo
stty echo

if [ "$np1" != "$np2" ]; then
  echo "Passwords do not match."
  exit 1
fi

ldappasswd -D uid="$USER",ou=people,dc=example,dc=org \
  -w "$oldp" \
  -a "$oldp" \
  -s "$np1"

A more flexible (and probably more secure) approach can be used by writing a custom program, or even a web interface. The following is part of a Ruby library that can change LDAP passwords. It sees use both on the command line, and on the web.

require 'ldap'
require 'base64'
require 'digest'
require 'password' # ruby-password

ldap_server = "ldap.example.org"
luser = "uid=#{ENV['USER']},ou=people,dc=example,dc=org"

# get the new password, check it, and create a salted hash from it
def get_password
  pwd1 = Password.get("New Password: ")
  pwd2 = Password.get("Retype New Password: ")

  raise if pwd1 != pwd2
  pwd1.check # check password strength
  
  salt = rand.to_s.gsub(/0\./, '')
  pass = pwd1.to_s
  hash = "{SSHA}"+Base64.encode64(Digest::SHA1.digest("#{pass}#{salt}")+salt).chomp!
  return hash
end

oldp = Password.get("Old Password: ")
newp = get_password

# We'll just replace it.  That we can bind proves that we either know
# the old password or are an admin.

replace = LDAP::Mod.new(LDAP::LDAP_MOD_REPLACE | LDAP::LDAP_MOD_BVALUES,
                        "userPassword",
                        [newp])

conn = LDAP::SSLConn.new(ldap_server, 389, true)
conn.set_option(LDAP::LDAP_OPT_PROTOCOL_VERSION, 3)
conn.bind(luser, oldp)
conn.modify(luser, [replace])

Although not guaranteed to be free of security holes (the password is kept in memory, for example) this is cleaner and more flexible than a simple sh script.

4.1 Setting attributes read-only

Several attributes in LDAP should be read-only. If left writable by the user, for example, a user could change his uidNumber attribute to 0 and get root access!

To begin with, the userPassword attribute should not be world-readable. By default, anyone who can connect to the LDAP server can read this attribute. To disable this, put the following in slapd.conf:

access to dn.subtree="ou=people,dc=example,dc=org"
  attrs=userPassword
  by self write
  by anonymous auth
  by * none

access to *
  by self write
  by * read

This will disallow reading of the userPassword attribute, while still allowing users to change their own passwords.

Additionally, you'll want to keep users from changing some of their own attributes. By default, users can change any attribute (except for those which the LDAP schemas themselves deny changes), such as uidNumber. To close this hole, modify the above to

access to dn.subtree="ou=people,dc=example,dc=org"
  attrs=userPassword
  by self write
  by anonymous auth
  by * none

access to attrs=homeDirectory,uidNumber,gidNumber
  by * read

access to *
  by self write
  by * read

This will stop users from being able to masquerade as other users.

4.2 Root account definition

Often the root or manager account for the LDAP service will be defined in the configuration file. OpenLDAP supports this, for example, and it works, but it can lead to trouble if slapd.conf is compromised. It may be better to use this only to bootstrap yourself into LDAP, and then define a root account there.

Even better is to define accounts that have limited permissions, and omit a root account entirely. For example, users to can add or remove user accounts are added to one group, but they cannot themselves change the membership of this group. Such a security policy would help mitigate the effects of a leaked password.

dn: cn=homemanagement,dc=example,dc=org
objectClass: top
objectClass: posixGroup
cn: homemanagement
gidNumber: 121 # required for posixGroup
memberUid: uid=tuser,ou=people,dc=example,dc=org
memberUid: uid=user2,ou=people,dc=example,dc=org

access to dn.subtree="ou=people,dc=example,dc=org"
  attr=homeDirectory
  by dn="cn=homemanagement,dc=example,dc=org"
  dnattr=memberUid write

4.3 Password storage

By default OpenLDAP will store the value of the userPassword attribute as it stores any other data: in the clear. Most of the time it is base 64 encoded, which provides enough protection to keep an honest administrator from knowing your password, but little else.

It is a good idea, then, to store passwords in a more secure format, such as SSHA (salted SHA). This is done by whatever program you use to change users' passwords.