3 A dummy script

The following script just emits a message each time the system boots up:

#!/bin/sh(1)

. /etc/rc.subr(2)

name="dummy"(3)
start_cmd="${name}_start"(4)
stop_cmd=":"(5)

dummy_start()(6)
{
    echo "Nothing started."
}

load_rc_config $name(7)
run_rc_command "$1"(8)

Things to note are:

(1)
An interpreted script should begin with the magic “shebang” line. That line specifies the interpreter program for the script. Due to the shebang line, the script can be invoked exactly like a binary program provided that it has the execute bit set. (See chmod(1).) For example, a system admin can run our script manually, from the command line:
# /etc/rc.d/dummy start

Note: In order to be properly managed by the rc.d framework, its scripts need to be written in the sh(1) language. If you have a service or port that uses a binary control utility or a startup routine written in another language, install that element in /usr/sbin (for the system) or /usr/local/sbin (for ports) and call it from a sh(1) script in the appropriate rc.d directory.

Tip: If you would like to learn the details of why rc.d scripts must be written in the sh(1) language, see how /etc/rc invokes them by means of run_rc_script, then study the implementation of run_rc_script in /etc/rc.subr.

(2)
In /etc/rc.subr, a number of sh(1) functions are defined for an rc.d script to use. The functions are documented in rc.subr(8). While it is theoretically possible to write an rc.d script without ever using rc.subr(8), its functions prove extremely handy and make the job an order of magnitude easier. So it is no surprise that everybody resorts to rc.subr(8) in rc.d scripts. We are not going to be an exception.

An rc.d script must “source” /etc/rc.subr (include it using “.”) before it calls rc.subr(8) functions so that sh(1) has an opportunity to learn the functions. The preferred style is to source /etc/rc.subr first of all.

Note: Some useful functions related to networking are provided by another include file, /etc/network.subr.

(3)
The mandatory variable name specifies the name of our script. It is required by rc.subr(8). That is, each rc.d script must set name before it calls rc.subr(8) functions.

Now it is the right time to choose a unique name for our script once and for all. We will use it in a number of places while developing the script. For a start, let us give the same name to the script file, too.

Note: The current style of rc.d scripting is to enclose values assigned to variables in double quotes. Keep in mind that it is just a style issue that may not always be applicable. You can safely omit quotes from around simple words without sh(1) metacharacters in them, while in certain cases you will need single quotes to prevent any interpretation of the value by sh(1). A programmer should be able to tell the language syntax from style conventions and use both of them wisely.

(4)
The main idea behind rc.subr(8) is that an rc.d script provides handlers, or methods, for rc.subr(8) to invoke. In particular, start, stop, and other arguments to an rc.d script are handled this way. A method is a sh(1) expression stored in a variable named argument_cmd, where argument corresponds to what can be specified on the script's command line. We will see later how rc.subr(8) provides default methods for the standard arguments.

Note: To make the code in rc.d more uniform, it is common to use ${name} wherever appropriate. Thus a number of lines can be just copied from one script to another.

(5)
We should keep in mind that rc.subr(8) provides default methods for the standard arguments. Consequently, we must override a standard method with a no-op sh(1) expression if we want it to do nothing.
(6)
The body of a sophisticated method can be implemented as a function. It is a good idea to make the function name meaningful.

Important: It is strongly recommended to add the prefix ${name} to the names of all functions defined in our script so they never clash with the functions from rc.subr(8) or another common include file.

(7)
This call to rc.subr(8) loads rc.conf(5) variables. Our script makes no use of them yet, but it still is recommended to load rc.conf(5) because there can be rc.conf(5) variables controlling rc.subr(8) itself.
(8)
Usually this is the last command in an rc.d script. It invokes the rc.subr(8) machinery to perform the requested action using the variables and methods our script has provided.

This, and other documents, can be downloaded from ftp://ftp.FreeBSD.org/pub/FreeBSD/doc/.

For questions about FreeBSD, read the documentation before contacting <questions@FreeBSD.org>.
For questions about this documentation, e-mail <doc@FreeBSD.org>.