Unfortunately, UNIX® systems do not come with the kind of everything-you-ever-wanted-and-lots-more-you-did-not-in-one-gigantic-package integrated development environments that other systems have. [1] However, it is possible to set up your own environment. It may not be as pretty, and it may not be quite as integrated, but you can set it up the way you want it. And it is free. And you have the source to it.
The key to it all is Emacs. Now there are some people who loathe it, but many who love it. If you are one of the former, I am afraid this section will hold little of interest to you. Also, you will need a fair amount of memory to run it--I would recommend 8MB in text mode and 16MB in X as the bare minimum to get reasonable performance.
Emacs is basically a highly customizable editor--indeed, it has been customized to the point where it is more like an operating system than an editor! Many developers and sysadmins do in fact spend practically all their time working inside Emacs, leaving it only to log out.
It is impossible even to summarize everything Emacs can do here, but here are some of the features of interest to developers:
Very powerful editor, allowing search-and-replace on both strings and regular expressions (patterns), jumping to start/end of block expression, etc, etc.
Pull-down menus and online help.
Language-dependent syntax highlighting and indentation.
Completely customizable.
You can compile and debug programs within Emacs.
On a compilation error, you can jump to the offending line of source code.
Friendly-ish front-end to the info program used for reading GNU hypertext documentation, including the documentation on Emacs itself.
Friendly front-end to gdb, allowing you to look at the source code as you step through your program.
You can read Usenet news and mail while your program is compiling.
And doubtless many more that I have overlooked.
Emacs can be installed on FreeBSD using the editors/emacs port.
Once it is installed, start it up and do C-h t to read an Emacs tutorial--that means hold down the control key, press h, let go of the control key, and then press t. (Alternatively, you can you use the mouse to select Emacs Tutorial from the Help menu).
Although Emacs does have menus, it is well worth learning the key bindings, as it is much quicker when you are editing something to press a couple of keys than to try to find the mouse and then click on the right place. And, when you are talking to seasoned Emacs users, you will find they often casually throw around expressions like “M-x replace-s RET foo RET bar RET” so it is useful to know what they mean. And in any case, Emacs has far too many useful functions for them to all fit on the menu bars.
Fortunately, it is quite easy to pick up the key-bindings, as they are displayed next to the menu item. My advice is to use the menu item for, say, opening a file until you understand how it works and feel confident with it, then try doing C-x C-f. When you are happy with that, move on to another menu command.
If you can not remember what a particular combination of keys does, select Describe Key from the Help menu and type it in--Emacs will tell you what it does. You can also use the Command Apropos menu item to find out all the commands which contain a particular word in them, with the key binding next to it.
By the way, the expression above means hold down the Meta key, press x, release the Meta key, type replace-s (short for replace-string--another feature of Emacs is that you can abbreviate commands), press the return key, type foo (the string you want replaced), press the return key, type bar (the string you want to replace foo with) and press return again. Emacs will then do the search-and-replace operation you have just requested.
If you are wondering what on earth the Meta key is, it is a special key that many UNIX workstations have. Unfortunately, PC's do not have one, so it is usually the alt key (or if you are unlucky, the escape key).
Oh, and to get out of Emacs, do C-x C-c (that means hold down the control key, press x, press c and release the control key). If you have any unsaved files open, Emacs will ask you if you want to save them. (Ignore the bit in the documentation where it says C-z is the usual way to leave Emacs--that leaves Emacs hanging around in the background, and is only really useful if you are on a system which does not have virtual terminals).
Emacs does many wonderful things; some of them are built in, some of them need to be configured.
Instead of using a proprietary macro language for configuration, Emacs uses a version of Lisp specially adapted for editors, known as Emacs Lisp. Working with Emacs Lisp can be quite helpful if you want to go on and learn something like Common Lisp. Emacs Lisp has many features of Common Lisp, although it is considerably smaller (and thus easier to master).
The best way to learn Emacs Lisp is to download the Emacs Tutorial
However, there is no need to actually know any Lisp to get started with configuring Emacs, as I have included a sample .emacs file, which should be enough to get you started. Just copy it into your home directory and restart Emacs if it is already running; it will read the commands from the file and (hopefully) give you a useful basic setup.
Unfortunately, there is far too much here to explain it in detail; however there are one or two points worth mentioning.
Everything beginning with a ; is a comment and is ignored by Emacs.
In the first line, the -*- Emacs-Lisp -*- is so that we can edit the .emacs file itself within Emacs and get all the fancy features for editing Emacs Lisp. Emacs usually tries to guess this based on the filename, and may not get it right for .emacs.
The tab key is bound to an indentation function in some modes, so when you press the tab key, it will indent the current line of code. If you want to put a tab character in whatever you are writing, hold the control key down while you are pressing the tab key.
This file supports syntax highlighting for C, C++, Perl, Lisp and Scheme, by guessing the language from the filename.
Emacs already has a pre-defined function called next-error. In a compilation output window, this allows you to
move from one compilation error to the next by doing M-n; we
define a complementary function, previous-error, that
allows you to go to a previous error by doing M-p. The nicest
feature of all is that C-c C-c will open up the source file in
which the error occurred and jump to the appropriate line.
We enable Emacs's ability to act as a server, so that if you are doing something outside Emacs and you want to edit a file, you can just type in
% emacsclient filename
and then you can edit the file in your Emacs! [2]
Example 2-1. A sample .emacs file
;; -*-Emacs-Lisp-*-
;; This file is designed to be re-evaled; use the variable first-time
;; to avoid any problems with this.
(defvar first-time t
"Flag signifying this is the first time that .emacs has been evaled")
;; Meta
(global-set-key "\M- " 'set-mark-command)
(global-set-key "\M-\C-h" 'backward-kill-word)
(global-set-key "\M-\C-r" 'query-replace)
(global-set-key "\M-r" 'replace-string)
(global-set-key "\M-g" 'goto-line)
(global-set-key "\M-h" 'help-command)
;; Function keys
(global-set-key [f1] 'manual-entry)
(global-set-key [f2] 'info)
(global-set-key [f3] 'repeat-complex-command)
(global-set-key [f4] 'advertised-undo)
(global-set-key [f5] 'eval-current-buffer)
(global-set-key [f6] 'buffer-menu)
(global-set-key [f7] 'other-window)
(global-set-key [f8] 'find-file)
(global-set-key [f9] 'save-buffer)
(global-set-key [f10] 'next-error)
(global-set-key [f11] 'compile)
(global-set-key [f12] 'grep)
(global-set-key [C-f1] 'compile)
(global-set-key [C-f2] 'grep)
(global-set-key [C-f3] 'next-error)
(global-set-key [C-f4] 'previous-error)
(global-set-key [C-f5] 'display-faces)
(global-set-key [C-f8] 'dired)
(global-set-key [C-f10] 'kill-compilation)
;; Keypad bindings
(global-set-key [up] "\C-p")
(global-set-key [down] "\C-n")
(global-set-key [left] "\C-b")
(global-set-key [right] "\C-f")
(global-set-key [home] "\C-a")
(global-set-key [end] "\C-e")
(global-set-key [prior] "\M-v")
(global-set-key [next] "\C-v")
(global-set-key [C-up] "\M-\C-b")
(global-set-key [C-down] "\M-\C-f")
(global-set-key [C-left] "\M-b")
(global-set-key [C-right] "\M-f")
(global-set-key [C-home] "\M-<")
(global-set-key [C-end] "\M->")
(global-set-key [C-prior] "\M-<")
(global-set-key [C-next] "\M->")
;; Mouse
(global-set-key [mouse-3] 'imenu)
;; Misc
(global-set-key [C-tab] "\C-q\t") ; Control tab quotes a tab.
(setq backup-by-copying-when-mismatch t)
;; Treat 'y' or <CR> as yes, 'n' as no.
(fset 'yes-or-no-p 'y-or-n-p)
(define-key query-replace-map [return] 'act)
(define-key query-replace-map [?\C-m] 'act)
;; Load packages
(require 'desktop)
(require 'tar-mode)
;; Pretty diff mode
(autoload 'ediff-buffers "ediff" "Intelligent Emacs interface to diff" t)
(autoload 'ediff-files "ediff" "Intelligent Emacs interface to diff" t)
(autoload 'ediff-files-remote "ediff"
"Intelligent Emacs interface to diff")
(if first-time
(setq auto-mode-alist
(append '(("\\.cpp$" . c++-mode)
("\\.hpp$" . c++-mode)
("\\.lsp$" . lisp-mode)
("\\.scm$" . scheme-mode)
("\\.pl$" . perl-mode)
) auto-mode-alist)))
;; Auto font lock mode
(defvar font-lock-auto-mode-list
(list 'c-mode 'c++-mode 'c++-c-mode 'emacs-lisp-mode 'lisp-mode 'perl-mode 'scheme-mode)
"List of modes to always start in font-lock-mode")
(defvar font-lock-mode-keyword-alist
'((c++-c-mode . c-font-lock-keywords)
(perl-mode . perl-font-lock-keywords))
"Associations between modes and keywords")
(defun font-lock-auto-mode-select ()
"Automatically select font-lock-mode if the current major mode is in font-lock-auto-mode-list"
(if (memq major-mode font-lock-auto-mode-list)
(progn
(font-lock-mode t))
)
)
(global-set-key [M-f1] 'font-lock-fontify-buffer)
;; New dabbrev stuff
;(require 'new-dabbrev)
(setq dabbrev-always-check-other-buffers t)
(setq dabbrev-abbrev-char-regexp "\\sw\\|\\s_")
(add-hook 'emacs-lisp-mode-hook
'(lambda ()
(set (make-local-variable 'dabbrev-case-fold-search) nil)
(set (make-local-variable 'dabbrev-case-replace) nil)))
(add-hook 'c-mode-hook
'(lambda ()
(set (make-local-variable 'dabbrev-case-fold-search) nil)
(set (make-local-variable 'dabbrev-case-replace) nil)))
(add-hook 'text-mode-hook
'(lambda ()
(set (make-local-variable 'dabbrev-case-fold-search) t)
(set (make-local-variable 'dabbrev-case-replace) t)))
;; C++ and C mode...
(defun my-c++-mode-hook ()
(setq tab-width 4)
(define-key c++-mode-map "\C-m" 'reindent-then-newline-and-indent)
(define-key c++-mode-map "\C-ce" 'c-comment-edit)
(setq c++-auto-hungry-initial-state 'none)
(setq c++-delete-function 'backward-delete-char)
(setq c++-tab-always-indent t)
(setq c-indent-level 4)
(setq c-continued-statement-offset 4)
(setq c++-empty-arglist-indent 4))
(defun my-c-mode-hook ()
(setq tab-width 4)
(define-key c-mode-map "\C-m" 'reindent-then-newline-and-indent)
(define-key c-mode-map "\C-ce" 'c-comment-edit)
(setq c-auto-hungry-initial-state 'none)
(setq c-delete-function 'backward-delete-char)
(setq c-tab-always-indent t)
;; BSD-ish indentation style
(setq c-indent-level 4)
(setq c-continued-statement-offset 4)
(setq c-brace-offset -4)
(setq c-argdecl-indent 0)
(setq c-label-offset -4))
;; Perl mode
(defun my-perl-mode-hook ()
(setq tab-width 4)
(define-key c++-mode-map "\C-m" 'reindent-then-newline-and-indent)
(setq perl-indent-level 4)
(setq perl-continued-statement-offset 4))
;; Scheme mode...
(defun my-scheme-mode-hook ()
(define-key scheme-mode-map "\C-m" 'reindent-then-newline-and-indent))
;; Emacs-Lisp mode...
(defun my-lisp-mode-hook ()
(define-key lisp-mode-map "\C-m" 'reindent-then-newline-and-indent)
(define-key lisp-mode-map "\C-i" 'lisp-indent-line)
(define-key lisp-mode-map "\C-j" 'eval-print-last-sexp))
;; Add all of the hooks...
(add-hook 'c++-mode-hook 'my-c++-mode-hook)
(add-hook 'c-mode-hook 'my-c-mode-hook)
(add-hook 'scheme-mode-hook 'my-scheme-mode-hook)
(add-hook 'emacs-lisp-mode-hook 'my-lisp-mode-hook)
(add-hook 'lisp-mode-hook 'my-lisp-mode-hook)
(add-hook 'perl-mode-hook 'my-perl-mode-hook)
;; Complement to next-error
(defun previous-error (n)
"Visit previous compilation error message and corresponding source code."
(interactive "p")
(next-error (- n)))
;; Misc...
(transient-mark-mode 1)
(setq mark-even-if-inactive t)
(setq visible-bell nil)
(setq next-line-add-newlines nil)
(setq compile-command "make")
(setq suggest-key-bindings nil)
(put 'eval-expression 'disabled nil)
(put 'narrow-to-region 'disabled nil)
(put 'set-goal-column 'disabled nil)
(if (>= emacs-major-version 21)
(setq show-trailing-whitespace t))
;; Elisp archive searching
(autoload 'format-lisp-code-directory "lispdir" nil t)
(autoload 'lisp-dir-apropos "lispdir" nil t)
(autoload 'lisp-dir-retrieve "lispdir" nil t)
(autoload 'lisp-dir-verify "lispdir" nil t)
;; Font lock mode
(defun my-make-face (face color &optional bold)
"Create a face from a color and optionally make it bold"
(make-face face)
(copy-face 'default face)
(set-face-foreground face color)
(if bold (make-face-bold face))
)
(if (eq window-system 'x)
(progn
(my-make-face 'blue "blue")
(my-make-face 'red "red")
(my-make-face 'green "dark green")
(setq font-lock-comment-face 'blue)
(setq font-lock-string-face 'bold)
(setq font-lock-type-face 'bold)
(setq font-lock-keyword-face 'bold)
(setq font-lock-function-name-face 'red)
(setq font-lock-doc-string-face 'green)
(add-hook 'find-file-hooks 'font-lock-auto-mode-select)
(setq baud-rate 1000000)
(global-set-key "\C-cmm" 'menu-bar-mode)
(global-set-key "\C-cms" 'scroll-bar-mode)
(global-set-key [backspace] 'backward-delete-char)
; (global-set-key [delete] 'delete-char)
(standard-display-european t)
(load-library "iso-transl")))
;; X11 or PC using direct screen writes
(if window-system
(progn
;; (global-set-key [M-f1] 'hilit-repaint-command)
;; (global-set-key [M-f2] [?\C-u M-f1])
(setq hilit-mode-enable-list
'(not text-mode c-mode c++-mode emacs-lisp-mode lisp-mode
scheme-mode)
hilit-auto-highlight nil
hilit-auto-rehighlight 'visible
hilit-inhibit-hooks nil
hilit-inhibit-rebinding t)
(require 'hilit19)
(require 'paren))
(setq baud-rate 2400) ; For slow serial connections
)
;; TTY type terminal
(if (and (not window-system)
(not (equal system-type 'ms-dos)))
(progn
(if first-time
(progn
(keyboard-translate ?\C-h ?\C-?)
(keyboard-translate ?\C-? ?\C-h)))))
;; Under UNIX
(if (not (equal system-type 'ms-dos))
(progn
(if first-time
(server-start))))
;; Add any face changes here
(add-hook 'term-setup-hook 'my-term-setup-hook)
(defun my-term-setup-hook ()
(if (eq window-system 'pc)
(progn
;; (set-face-background 'default "red")
)))
;; Restore the "desktop" - do this as late as possible
(if first-time
(progn
(desktop-load-default)
(desktop-read)))
;; Indicate that this file has been read at least once
(setq first-time nil)
;; No need to debug anything now
(setq debug-on-error nil)
;; All done
(message "All done, %s%s" (user-login-name) ".")
Now, this is all very well if you only want to program in the languages already catered for in the .emacs file (C, C++, Perl, Lisp and Scheme), but what happens if a new language called “whizbang” comes out, full of exciting features?
The first thing to do is find out if whizbang comes with any files that tell Emacs about the language. These usually end in .el, short for “Emacs Lisp”. For example, if whizbang is a FreeBSD port, we can locate these files by doing
% find /usr/ports/lang/whizbang -name "*.el" -print
and install them by copying them into the Emacs site Lisp directory. On FreeBSD, this is /usr/local/share/emacs/site-lisp.
So for example, if the output from the find command was
/usr/ports/lang/whizbang/work/misc/whizbang.el
we would do
# cp /usr/ports/lang/whizbang/work/misc/whizbang.el /usr/local/share/emacs/site-lisp
Next, we need to decide what extension whizbang source files have. Let's say for the sake of argument that they all end in .wiz. We need to add an entry to our .emacs file to make sure Emacs will be able to use the information in whizbang.el.
Find the auto-mode-alist entry in .emacs and add a line for whizbang, such as:
...
("\\.lsp$" . lisp-mode)
("\\.wiz$" . whizbang-mode)
("\\.scm$" . scheme-mode)
...
This means that Emacs will automatically go into whizbang-mode when you edit a file ending in .wiz.
Just below this, you will find the font-lock-auto-mode-list entry. Add whizbang-mode to it like so:
;; Auto font lock mode (defvar font-lock-auto-mode-list (list 'c-mode 'c++-mode 'c++-c-mode 'emacs-lisp-mode 'whizbang-mode 'lisp-mode 'perl-mode 'scheme-mode) "List of modes to always start in font-lock-mode")
This means that Emacs will always enable font-lock-mode
(ie syntax highlighting) when editing a .wiz file.
And that is all that is needed. If there is anything else you want done automatically
when you open up a .wiz file, you can add a whizbang-mode hook (see my-scheme-mode-hook for a simple example that adds auto-indent).
| [1] |
Some powerful, free IDEs now exist, such as KDevelop in the Ports Collection. |
| [2] |
Many Emacs users set their EDITOR environment to emacsclient so this happens every time they need to edit a file. |
This, and other documents, can be downloaded from ftp://ftp.FreeBSD.org/pub/FreeBSD/doc/.
For questions about FreeBSD, read the documentation before contacting <questions@FreeBSD.org>.
For questions about this documentation, e-mail <doc@FreeBSD.org>.